无锡科达脚手架厂【官网】主营:脚手架、移动脚手架、门式脚手架、梯形脚手架

无锡科达脚手架厂

示例图片三
网站首页 > 新闻资讯 > 行业知识

厂家解读门式脚手架的规范标准【国标】

2018-11-14 14:46:22 无锡科达脚手架厂 阅读

门式脚手架行业当中,门式脚手架是应用最为多的一种,也是备受大家欢迎的一种。门式脚手架的规范标准情况怎么样呢?在搭设之后验收不可少,这是非常重要的一项,否则不可靠的移动脚手架搭设,可能会造成人身财产等方面的损失,还需要格外当心了,尽量避免了。高度在20m及20m以下的移动脚手架,由单位工程负责人组织技术安全人员进行检查验收;高度大于20m的脚手架,由工程处技术负责人随工程进度分阶段组织单位工程负责人及有关的技术安全人员进行检查验收。

In the portal scaffolding industry, portal scaffolding is one of the most widely used and popular. What is the standard condition of portal scaffolds? Acceptance is indispensable after erection, which is a very important one. Otherwise, unreliable mobile scaffolding erection may cause personal and property losses, but also need to be extra careful to avoid as far as possible. Scaffolds with height below 20m and 20m shall be inspected and checked by the technical safety personnel in charge of the unit project; scaffolds with height above 20m shall be inspected and checked by the technical personnel in charge of the unit project and relevant technical safety personnel in stages according to the progress of the project. 门式脚手架验收时应具备下列文件:必要的施工设计文件及组装图;脚手架部件的出厂合格证或质量分级合格标志;脚手架工程的施工记录及质量检查记录;移动脚手架搭设的重大问题及处理记录;移动脚手架工程的施工验收报告。

When accepting portal scaffolding, the following documents should be provided: necessary construction design documents and assembly drawings; manufacturer's qualification certificate of scaffolding components or quality grading qualification marks; construction records and quality inspection records of scaffolding projects; major problems and treatment records of scaffolding erection; construction acceptance reports of scaffolding projects.

门式脚手架工程的验收,除查验有关文件外,还应进行现场抽查。

In addition to checking relevant documents, the acceptance of portal scaffold works should be carried out on-site spot checks.

抽查应着重以下各项,并记人施工验收报告:安全措施的杆件是否齐全,扣件是否紧固、合格;安全网的张挂及扶手的设置是否齐全;基础是否平整坚实;连墙杆的设置有否遗漏,是否齐全并符合要求;垂直度及水平度是否合格。

Spot check should focus on the following items, and record the construction acceptance report: whether the rods of safety measures are complete, whether fasteners are tightened and qualified; whether the safety net and handrails are set up completely; whether the foundation is smooth and solid; whether the connecting rods are set up missing, whether they are complete and meet the requirements; whether the vertical and horizontal degrees are in line with the requirements; Ge.

门式门式脚手架的水平度:底步门式脚手架沿墙的纵向水平偏差应L/600(L为梯形脚手架的长度)。门式梯形脚手架搭设尺寸允许偏差:脚手架的垂直度:脚手架沿墙面纵向的垂直偏差应H/400(H为脚手架高度)及50mm;脚手架的横向垂直偏差H/600及50mm;每步架的纵向与横向垂直度偏差应ho/600(h2为门架高度)。

Level of portal scaffolding: The vertical horizontal deviation of the bottom scaffolding along the wall should be L/600 (L is the length of the scaffolding). The allowable deviation of scaffolding dimensions: the vertical deviation of scaffolding: the vertical deviation of scaffolding along the wall should be H/400 (H is scaffolding height) and 50mm; the horizontal vertical deviation of scaffolding should be H/600 and 50mm; the vertical and horizontal deviation of each scaffold should be ho/600 (h2 is the height of the scaffold).

门式脚手架的规范标准目前国家已经有了一定的规定,大多数正规而专业的生产、出售或是租赁脚手架的公司,都有相关的规定,并会按照相关的要求去生产。在搭设的时候,也要按照规范来执行的。

At present, the standard of portal scaffolding has certain regulations in our country. Most of the companies that produce, sell or rent scaffolding regularly and professionally have relevant regulations and will produce scaffolding according to relevant requirements. In the course of erection, they should also be carried out according to the norms.



标签:   脚手架 移动脚手架 门式脚手架 梯形脚手架 脚手架厂家